|
|
|
|
|
|
ATLAS CRAFTSMAN LATHE 10F-16 LEADSCREW SUPPORT BRACKET
|
|
|
GOOD USED ATLAS CRAFTSMAN 10F-16 LEADSCREW SUPPORT BRACKET. PRODUCTS AVAILABLE VARY IN FINISH BUT ALL ARE GOOD USED WITH NO REPAIRS OR DAMAGE. FOR 3/4 LEADSCREW LATHES. HAS 1/2 BORE THROUGH.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-12 INCH LATHE LEADSCREW SUPPORT BRACKET 10F-16
|
|
|
NEW CNC PRECISION MADE ATLAS CRAFTSMAN 10-12 INCH LATHE LEADSCREW SUPPORT BRACKET. MADE FROM HIGH STRENGTH ABS WITH OILITE BUSHINGS. FOR 3/4 LEADSCREW LATHES. REPLACES DIE CAST AND BRITTLE 10F-16 PART. EXACT FIT WITH OIL HOLE.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 6 INCH LATHE M6-502 MILLING ATTACHMENT VISE
|
|
|
NEW FACTORY OEM PART M6-502 ATLAS CRAFTSMAN 6 INCH LATHE MILLING ATTACHMENT VISE.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 12 INCH LATHE L6-722 MOTOR BELT GUARD ASSEMBLY
|
|
|
FINE USED ATLAS CRAFTSMAN 12 INCH LATHE L6-722 MOTOR BELT GUARD WITH HINGE PIN AND SPRING CLIP L6-730.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-23 3 INCH CARRIAGE/TAILSTOCK HANDWHEEL
|
|
|
NEW ATLAS CRAFTSMAN 3 INCH HANDWHEEL M6-23. WORKS FOR THE TAILSTOCK, CARRIAGE, MILLING ATTACHMENT AND MICA CUTTER ATTACHMENT.
|
|
|
|
|
|
|
|
|
|
ATLASC RAFTSMAN 6 INCH LATHE GEAR CASE REPAIR KIT
|
|
|
NEW ATLAS CRAFTSMAN 6 INCH LATHE GEAR CASE REPAIR KIT WITH M6-68 AND M6-102.
|
|
|
|
|
|
|
|
|
|
NEW 10-1512 20T GEAR QCGB RH LEVER USA MADE
|
|
|
NEW 10-1512 QCGB GEAR FOR RH LEVER. APPROX 1.100 DIAMETER WITH INTERNAL KEYWAY.
|
|
|
|
|
|
|
|
|
|
NEW 10-1523 20T GEAR QCGB LH LEVER USA MADE
|
|
|
NEW 10-1523 QCGB GEAR FOR LH LEVER. APPROX 1.375 DIAMETER WITH INTERNAL KEYWAY.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN LATHE 9-16 LEADSCREW SUPPORT BEARING BRACKET
|
|
|
NEW 3D PRINTER 9-16 LEADSCREW SUPPORT BEARING BRACKET. THIS FITS THE OLDER 9, 10D AND 12 INCH LATHES WITH 5/8 THREAD DIAMETER LEADSCREW AND DO NOT HAVE POWER CROSSFEED. HOLE IS 3/8 FOR THE LEADSCREW END.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 6 INCH LATHE REPLACEMENT USA MADE M6-308/3950-23
|
|
|
NEW USA MADE M6-308/3950-23 COMPOUND CRANK HANDLE. REPLACES DIECAST ORIGINAL NO LONGER SUPPORTED AS NEW. EXACT FIT. FOR ATLAS CRAFTSMAN 6 INCH SWING LATHES. VERY DURABLE. LAST PICTURE SHOWS SIZE COMPARISON TO THE ORIGINAL.
|
|
|
|
|
|
|
|
|
|
NEW USA MADE ALL STEEL ATLAS CRAFTSMAN 9-12 INCH LATHE 40 TOOTH CHANGE GEAR
|
|
|
NEW all steel USA made 9-101-40A 40 TOOTH CHANGE GEAR. 3/4 BORE AND 3/16 KEYS. FITS 9-12 INCH SWING ATLAS CRAFTSMAN LATHES....
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 9-12 LATHE 9-100-32 SPINDLE END GEAR
|
|
|
NEW FACTORY 9-100-32 TOOTH ATLAS CRAFTSMAN LATHE SPINDLE END GEAR. 1 1/4 BORE, 3/16 KEY, 32 TOOTH.
|
|
|
|
|
|
|
|
|
|
NEW OEM ATLAS CRAFTSMAN LATHE 9-47 REVERSER FEED GEARBOX GEAR
|
|
|
NEW OEM ATLAS CRAFTSMAN LATHE REVERSER FEED GEARBOX GEAR 9-47.
|
|
|
|
|
|
|
|
|
|
NEW OEM ATLAS CRAFTSMAN 101 618 6 INCH LATHE M6-12A HALF NUTS
|
|
|
NEW OEM FACTORY ATLAS CRAFTSMAN 101 618 6 INCH LATHE M6-12A HALF/SPLIT NUT PAIR.
|
|
|
|
|
|
|
|
|
|
NEW FACTORY OEM 9-12 HALF SPLIT NUTS FOR OLDER 9,10+12 LATHES
|
|
|
NEW FACTORY OEM REPLACEMENT 9-12 HALF SPLIT NUTS FIT OLDER 9,10+12 INCH ATLAS CRAFTSMAN LATHES WITH 5/8 DIAMETER THREADED LEADSCREWS.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN QUICK CHANGE GEARBOX 10-1524X 32T GEAR
|
|
|
NEW 10-1524X 32T GEAR FOR THE LH LEVER ON THE ATLAS CRAFTSMAN QUICK CHANGE GEARBOXES.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN QUICK CHANGE GEARBOX 10-1513X 45T GEAR
|
|
|
NEW 10-1513X 45T GEAR FOR THE RH LEVER ON THE ATLAS CRAFTSMAN QUICK CHANGE GEARBOXES.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 9-12 LATHE TRAVERSE GEAR CASE REPAIR KIT
|
|
|
NEW 3 PIECE ATLAS CRAFTSMAN 9-12 LATHE TRAVERSE GEAR CASE REPAIR KIT.
|
|
|
|
|
|
|
|
|
|
FINE USED ATLAS CROSSFEED SCREW FOR 10 AND 12 INCH LATHES
|
|
|
FINE USED CROSSFEED SCREW FOR THE ATLAS CRAFTSMAN 10-12 INCH LATHES. NON COMMERCIAL ONLY AND THE LATHES WITH POWER CROSSFEED AND 3/4 DIAMETER LEADSCREWS.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS 10 INCH QC LATHE GEARBOX BUSHING REBUILD KIT
|
|
|
9 PIECE BUSHING SET FOR THE ATLAS 10 INCH QUICK CHANGE GEARBOX WITH ORIGINAL ZAMAK LEVERS.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 6 INCH LATHE M6-58X TUMBLER ASSEMBLY
|
|
|
ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-58X TUMBLER ASSEMBLY.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 6 INCH LATHE 341-374 SPINDLE BACK GEAR LARGE 62/32T USED
|
|
|
EXCELLENT ATLAS CRAFTSMAN 6 INCH LATHE LARGE BACK GEAR 341-374 FITS ATLAS 10100 AND CRAFTSMAN 101.21200 LATHES.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN L6-1014 QUICK CHANGE GEARBOX GEAR
|
|
|
L6-1014 QUICK CHANGE GEARBOX 16 TOOTH 1/2 BORE WITH KEY.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSTMAN 50 & 60 TOOTH CHANGE GEARS FOR METRIC THREADING WITH INSTRUCTIONS
|
|
|
NEW 50 & 60 TOOTH CHANGE GEARS FOR ATLAS CRAFTSMAN 9-12 INCH LATHES. FOR METRIC AND ODD ENGLISH THREADING. 3/4 BORE AND (2) 3/16 KEYS 180 DEGREES APART. COMES WITH 4 PAGES OF INSTRUCTIONS.
|
|
|
|
|
|
|
|
|
|
NEW ORIGINAL ATLAS CRAFTSMAN 6 INCH LATHE M6-61/3950-22 CROSSLIDE HANDLE ASSY STEEL
|
|
|
NEW STEEL ORIGINAL ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-61/3950-22 CROSSLIDE HANDLE ASSEMBLY.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 9-12 INCH LATHE L2-61 CROSSLIDE HANDLE ASSY.
|
|
|
NEW ATLAS L2-61 CROSSLIDE HANDLE .. FITS 9-12 INCH ATLAS AND CRAFTSMAN LATHES. AND ATLAS MILLS AND SHAPERS. 3/8 bore with 1/8 key.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN LATHE 10-25 GEAR CHANGE BANJO BRACKET
|
|
|
GOOD USED ATLAS 10-25 GEAR CHANGE BANJO BRACKET .
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 6 INCH LATHE M6-11 GEAR CASE FINE USED
|
|
|
FINE USED AND CLEAN ATLAS CRAFTSMAN 6 INCH LATHE M6-11 GEAR CASE.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 9-12 INCH LATHE 10D-308 COMPOUND HANDLE ASSEMBLY
|
|
|
NEW ATLAS CRAFTSMAN 9-12 INCH LATHE 10D-308 COMPOUND HANDLE ASSEMBLY. 3/8 bore and 1/8 keyway
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 10-12 LATHE HEADSTOCK PULLEY ASSEMBLY+GEAR
|
|
|
ATLAS CRAFTSMAN LATHE HEADSTOCK SPINDLE PULLEY AND GEAR ASSEMBLY WITH 990-359 AND 10-242.
|
|
|
|
|
|
|
|
|
|
COMPLETE ATLAS CRAFTSMAN 10-12 LATHE 10-250X BACK GEAR ASSEMBLY
|
|
|
COMPLETE ATLAS CRAFTSMAN 10-12 INCH LATHE 10-250X BACK GEAR ASSEMBLY.
|
|
|
|
|
|
|
|
|
|
New atlas craftsman 12 inch lathe countershaft repair kit
|
|
|
L3-107 shaft and L3-109 bushings with key
|
|
|
|
|
|
|
|
|
|
NEW OEM ATLAS CRAFTSMAN 10 INCH LATHE 9-49A GEARBOX INPUT GEAR
|
|
|
NEW FACTORY OEM ATLAS 9-49A REVERSER FEED GEARBOX INPUT GEAR.
|
|
|
|
|
|
|
|
|
|
NEW STEEL ATLAS CRAFTSMAN LATHE 10F-83 990-264 APRON MITRE GEAR
|
|
|
NEW ATLAS CRAFTSMAN LATHE 10F-83 , 990-264 STEEL MITRE GEAR. FOR POWER CROSSFEED APPLICATIONS.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN LATHE 10-80 4 STEP COUNTERSHAFT PULLEY
|
|
|
EXCELLENT USED ATLAS CRAFTSMAN LATHE 4 STEP 10-80 COUNTERSHAFT PULLEY WITH 3/4 BORE AND KEY.
|
|
|
|
|
|
|
|
|
|
ORIGINAL ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-428 DUAL MOTOR PULLEY
|
|
|
ORIGINAL ATLAS CRAFTSMAN M6-428 DUAL VEE 2 STEP MOTOR PULLEY. 5/8 BORE AND KEY WITH SET SCREW AND BUSHING FOR 1/2 MOTOR SHAFT ADAPTING.
|
|
|
|
|
|
|
|
|
|
USED ATLAS CRAFTSMAN 12 INCH LATHE TAILSTOCK ASSEMBLY L4-5X
|
|
|
USED ATLAS CRAFTSMAN 12 INCH LATHE TAILSTOCK ASSEMBLY. ONLY SHIPS LARGE FLAT RATE IN USA AND ONLY PRIORITY MAIL OVERSEAS. TOO HEAVY FOR INTERNATIONAL FLAT RATE SHIPPING.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN LATHE 10-1552X COMPOUND GEAR FOR QC GEARBOX
|
|
|
NEW 10-1552X 16/32T COMPOUND GEAR FOR ATLAS CRAFTSMAN QC GEARBOXES. WITH 1/2 I.D. BUSHING.
|
|
|
|
|
|
|
|
|
|
USED ATLAS CRAFTSMAN 6 INCH LATHE 341-375 BACK GEAR 58T
|
|
|
USED ATLAS CRAFTSMAN 6 INCH LATHE BACK GEAR 341-375 58T FITS ATLAS 10100 AND CRAFTSMAN 101.21200 LATHES.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-12 LATHE 10-1546 OR 10-101-16A 16/32 T COMPOUND GEAR
|
|
|
NEW USA MADE 10-1546 TUMBLER GEAR OR 10-101-16A COMPOUND GEAR 16/32 TOOTH ALL STEEL WITH BUSHING.
|
|
|
|
|
|
|
|
|
|
ATLAS 10-12 LATHE 24/48 FEED REDUCTION GEAR SET
|
|
|
24/48 TOOTH FEED GEAR REDUCTION SET. COMPLETE ASSEMBLY.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-12 LATHE POWER CROSSFEED REPAIR KIT NEW 3D PRINTED
|
|
|
NEW 3D PRINTED ATLAS CRAFTSMAN 10-12 INCH LATHE POWER CROSSFEED REPAIR KIT. HIGH END 3D PRINTED PARTS WITH WARRANTY. LEADSCREW GEAR COMES WITH SPECIAL COLLAR AND RETAINER CLIP. STRONG AND QUIET.
|
|
|
|
|
|
|
|
|
|
NEW OEM ATLAS CRAFTSMAN LATHE 9-48B REVERSER FEED GEARBOX GEAR
|
|
|
NEW OEM ATLAS CRAFTSMAN LATHE 9-48B REVERSER FEED GEARBOX GEAR.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 6 INCH LATHE SPINDLE AND BEARING ASSEMBLY
|
|
|
ATLAS CRAFTSMAN 6 INCH LATHE SPINDLE AND BEARING ASSEMBLY. 1-10 THREADED SPINDLE WITH MATCHING BEARINGS. FITS MODELS 101.21200 AND 10100 ATLAS CRAFTSMAN 6 INCH SWING LATHES.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 6 INCH LATHE SOLID ALUMINUM M6-11 GEAR CASE ASSEMBLY
|
|
|
NEW MACHINED ALUMINUM ATLAS CRAFTSMAN 6 INCH LATHE COMPLETE M6-11 GEAR CASE. ALL NEW MACHINED FROM SOLID ALUMINUM MATERIAL.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE 5 INCH BACKING PLATE FOR 5C COLLET CHUCK
|
|
|
NEW 5 INCH DIAMETER 1 1/2-8 MOUNT BACKING PLATE WITH 3 EQUALLY SPACED M8 TAPPED HOLES FOR MOUNTING A 5C COLLET CHUCK. REGISTER DIAMETER MAY HAVE TO BE ALTERED FOR A SOUTH BEND LATHE TO FIT THE BIGGER REGISTER OF THE SPINDLES. REGISTRATION BOSS WILL NEED TO BE TURNED TO FIT AS REQUIRE FOR BEST ACCURACY.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE 5 INCH BACKING PLATE FOR 5 INCH CHUCK
|
|
|
NEW 5 INCH DIAMETER 1 1/2-8 MOUNT BACKING PLATE WITH 3 EQUALLY SPACED COUNTERBORED HOLES FOR MOUNTING A 5 INCH LATHE CHUCK. REGISTER DIAMETER MAY HAVE TO BE ALTERED FOR A SOUTH BEND LATHE TO FIT THE BIGGER REGISTER OF THE SPINDLES. REGISTRATION BOSS WILL NEED TO BE TURNED TO FIT AS REQUIRE FOR BEST ACCURACY.
|
|
|
|
|
|
|
|
|
|
NEW USA MADE BRASS 10F-12 HALF/SPLIT NUTS
|
|
|
NEW USA MADE BRASS 10F-12 SPLIT/HALF NUTS. FIT ATLAS CRAFTSMAN 10-12 INCH LATHES WITH 3/4 DIAMETER THREADED LEADSCREWS.
|
|
|
|
|
|
|
|
|
|
NEW STEEL 10F-82A, 341-051 LEADSCREW DRIVE MITRE GEAR
|
|
|
NEW 341-051 LEADSCREW MITRE GEAR. STEEL NOT POT METAL. SAME AS 10F-82A.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 6 INCH SWING LATHE CROSSFEED SCREW AND NUT ASSEMBLY
|
|
|
ATLAS CRAFTSMAN 6 INCH SWING CROSSFEED SCREW AND NUT ASSEMBLY. EXCELLENT USED SCREW WITH NEW M6-19A NUT.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-429 SOLID STEEL MOTOR PULLEY
|
|
|
NEW USA MADE SOLID STEEL M6-429 2 STEP MOTOR PULLEY WITH 3/16 KEYWAY IN THE 5/8 BORE. NO KEY OR SET SCREW PROVIDED.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-12 LATHE 10-1551X 16/32 COMPOUND GEAR FOR QUICK CHANGE GEARBOX
|
|
|
NEW 10-1551X 16/32 TOOTH COMPOUND GEAR WITH 5/8 ID BUSHING FOR ATLAS CRAFTSMAN 10-12 INCH LATHES WITH QUICK CHANGE GEARBOX ATTACHMENTS.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 6 INCH LATHE M6-5X COMPLETE TAILSTOCK ASSEMBLY
|
|
|
FINE USED ATLAS CRAFTSMAN M6-5X TAILSTOCK ASSEMBLY WITH CLAMP.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS 10 INCH LATHE COUNTERSHAFT PULLEY ASSEMBLY CONVERSION KIT USA MADE
|
|
|
NEW USA MADE ATLAS 10 INCH LATHE COUNTERSHAFT PULLEY ASSEMBLY CONVERSION KIT. COMES WITH NEW SHAFT AND 2 NEW HOUSINGS WITH SELF LUBRICATING OIL IMPREGNATED BUSHINGS FOR A CLEAN, WORRY FREE ASSEMBLY. JUST ADD YOUR 2 PULLEYS AND SET SCREW COLLARS AND YOU WILL NOT HAVE TO WORRY ABOUT GREASING THE BEARINGS AGAIN. IT IS THE SAME SET UP THE 12 INCH LATHES USE NOW.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 6 INCH LATHE 4 STEP MOTOR PULLEY+BUSHING 560-195
|
|
|
FINE USED ATLAS CRAFTSMAN 560-195 4 STEP MOTOR PULLEY WITH 5/8 BORE AND KEY AND COMES WITH SPLIT BUSING TO ADAPT TO 1/2 SHAFT MOTORS.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 6 INCH LATHE M6-241X SPINDLE BACK GEAR
|
|
|
NEW OEM FACTORY ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-241X SPINDLE BULL GEAR ASSEMBLY WITH BACK GEAR PIN.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN LATHE LEADSCREWS USED INQUIRE BEFORE ORDERING
|
|
|
VARIOUS USED ATLAS CRAFTSMAN LATHE LEADSCREWS. FOR 6, 10 AND 12 INCH MODELS. PLEASE INQUIRE VIA EMAIL OR CALL TO BE SURE YOUR MODEL SCREW IS AVAILABLE. ALL ARE IN EXCELLENT USED CONDITION AND SHOW LITTLE WEAR.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 10+12 INCH LATHE CROSSLIDE SCREW+NUT ASSY
|
|
|
EXCELLENT USED CROSSFEED SCREW WITH NEW 10F-19 NUT. FITS 10+12 INCH LATHES WITH 3/4 LEADSCREWS AND POWER CROSSFEED. MEASURES 12 3/4 LONG.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 9-12 INCH LATHE 9-427 DUAL COUNTERSHAFT PULLEY USED
|
|
|
EXCELLENT USED ATLAS CRAFTSMAN LATHE 9-427 DUAL VEE COUNTERSHAFT PULLEY ASSEMBLY WITH 3/4 ID.
|
|
|
|
|
|
|
|
|
|
NEW ORIGINAL ATLAS CRAFTSMAN 10-428 DUAL MOTOR PULLEY 5/8 BORE+KEY+SET SCREW
|
|
|
NEW ORIGINAL FACTORY ATLAS 10-428 DUAL VEE MOTOR PULLEY WITH 5/8 BORE WITH KEY AND SET SCREW. SOLID ALUMINUM PART FOR LONG LIFE.
|
|
|
|
|
|
|
|
|
|
USED ATLAS CRAFTSMAN 10 INCH LATHE TAILSTOCK ASSEMBLY 10D-5X
|
|
|
USED ATLAS CRAFTSMAN 10 INCH LATHE TAILSTOCK ASSEMBLY.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 10-12 LATHE QUICK CHANGE GEARBOX LEVER 10-1586
|
|
|
USED 10-1586 LEVER FOR ALL QCGB LATHES. CAST IRON CAN REPLACE ZAMAC LEVERS FROM EARLY 10 INCH MODELS.
|
|
|
|
|
|
|
|
|
|
USED ATLAS M6-303 COMPOUND TOOL SLIDE
|
|
|
USED M6-303 TOOL SLIDE
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-12 INCH LATHE 10F-11 TRAVERSE GEAR CASE
|
|
|
NEW SOLID ALUMINUM ATLAS CRAFTSMAN LATHE 10F-11 TRAVERSE GEAR CASE . USA MADE. NEW STRONGER ALUMINUM PART. FITS ATLAS CRAFTSMAN 10-12 INCH LATHES. NO LOCATOR PIN HOLES ADDED.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 10-12 LATHE TRAVERSE GEAR CASE ASSEMBLY FINE USED
|
|
|
FINE USED ATLAS CRAFTSMAN 10-12 INCH LATHE TRAVERSE GEAR CASE ASSEMBLY. FITS 10-12 INCH LATHES WITH 3/4 DIAMETER LEADSCREWS AND POWER CROSSFEED OPTION.
|
|
|
|
|
|
|
|
|
|
USED ATLAS 10 INCH LATHE COMPOUND TOOL SLIDE 9-303
|
|
|
USED 9-303 ATLAS 10 INCH LATHE TOOL SLIDE .
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN LATHE 9-11 TRAVERSE GEAR CASE FITS 9, 10D AND 12 INCH LATHES WITH 5/8 LEADSCREWS
|
|
|
NEW FROM MYMACHINESHOP.NET USA MADE 9-11 GEAR CASE. SOLID T-6061 ALUMINUM CONSTRUCTION. FITS 9, 10D AND 12 INCH ATLAS AND CRAFTSMAN LATHES WITH 5/8 LEADSCREWS AND ARE W/O POWER CROSSFEED. SIMPLY TRANSFER YOUR EXISTING GEARS AND SHAFT FOR YEARS OF TROUBLE FREE USE. THIS PART IS NOT AVAILABLE AND OBSOLETE FROM THE MANUFACTURER. THIS HAS BEEN MADE EXACTLY TO THE ORIGINAL PRINT EXCEPT EXTRA MATERIAL WAS LEFT IN THE WEAK AREAS WHERE THEY WERE PRONE TO FAIL IN THE PAST. ALL CLEARANCES AND FIT ARE STILL GOOD TO GO AND THEY HAVE BEEN FIT AND TESTED HERE AT MY SHOP ON AN ACTUAL APRON AND BED.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-12 LATHE 10-1550X 16/32 T COMPOUND GEAR
|
|
|
New 10-1550X 16/32 compound gear for the Atlas Craftsman quick change gearbox.
|
|
|
|
|
|
|
|
|
|
COMPLETE ATLAS CRAFTSMAN 10-12 INCH LATHE COUNTERSHAFT PULLEY ASSEMBLY
|
|
|
USED ATLAS CRAFTSMAN 10-12 INCH LATHE COUNTERSHAFT, PULLEYS, END CAPS AND BEARING ASSEMBLY.. MUST SHIP UPS!!!!
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-502 MILLING ATTACHMENT VISE HD SOLID STEEL
|
|
|
NEW FROM MYMACHINESHOP.NET SOLID C1020 STEEL MILLING ATTACHMENT VISE REPLACES 10-502. EXACT FIT AND IS OVER 100 DOLLARS CHEAPER THAN THE FACTORY CAST IRON PART.
|
|
|
|
|
|
|
|
|
|
NEW STEEL USA MADE TRAVERSE GEAR CASE REPLACES 10F-11
|
|
|
NEW USA MADE ALL STEEL TRAVERSE GEAR CASE REPLACES FACTORY 10F-11. COMES WITH (2) 1/4-20 SHCS FOR MOUNTING. DOES NOT COME WITH GEARS OR SHAFT. STURDY DESIGN FOR LONG LIFE.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-101X CHANGE GEAR SET
|
|
|
ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-101X CHANGE GEAR SET NEVER USED. FITS 618, 3950 AND 101 SIMILAR MODELS.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 9-12 INCH LATHE REPLACEMENT LARGE CAPACITY MILLING ATTACHMENT SCREW VISE
|
|
|
NEW 3 1/2 INCH WIDE 3 INCH CAPACITY SCREW VISE REPLACES 10-502 CAST VISE ON THE 10-500 MILLING ATTACHMENTS. 1 1/2 JAW DEPTH.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-303 COMPOUND TOOL SLIDE
|
|
|
NEW AND HARD TO FIND M6-303 / 704-073 COMPOUND REST TOOL SLIDE WITHOUT GIB.
|
|
|
|
|
|
|
|
|
|
NEW M6-303 COMPOUND TOOL SLIDE USA SOLID STEEL ATLAS CRAFTSMAN 6 INCH LATHES
|
|
|
NEW USA MADE SOLID STEEL M6-303 COMPOUND TOOL SLIDE FITS MOST 6 INCH SWING ATLAS CRAFTSMAN LATHES. GIB AND HARDWARE NOT INCLUDED.
|
|
|
|
|
|
|
|
|
|
COMPLETE ATLAS CRAFTSMAN LATHE APRON HANDLE KIT
|
|
|
COMPLETE ATLAS CRAFTSMAN 10 AND 12 INCH LATHE HANDLE KIT. COMES WITH 4 INCH HANDWHEEL, CROSSLIDE HANDLE, COMPOUND HANDLE AND HALF NUT HANDLE. ALL GOOD USED ORIGINAL ATLAS PARTS. SOME SHOW USE.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-12 INCH LATHE POWER CROSSFEED REPAIR KIT
|
|
|
NEW POWER CROSSFEED GEAR REPAIR KIT..FOR 10-12 INCH LATHES WITH 3/4 LEADSCREWS AND POWER CROSSFEED. NEW STEEL GEARS.
|
|
|
|
|
|
|
|
|
|
NEW USA MADE COMPLETE ATLAS CRAFTSMAN 9-12 INCH LATHE 9-11X GEAR CASE ASSEMBLY
|
|
|
USA MADE SOLID ALUMINUM 9-11X TRAVERSE GEAR CASE ASSEMBLY WITH NEW STEEL SHAFT AND NEW STEEL GEARS. THIS ONLY FITS THE OLDER 9, 10D AND 12 INCH LATHES WITH 5/8 DIAMETER THREADED LEADSCREWS AND ARE WITHOUT POWER CROSSFEED.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 9-12 LATHE COUNTERSHAFT PULLEY 9-427/560-060
|
|
|
NEW HEAVY DUTY ALUMINUM 9-427/560-060 DUAL VEE LARGE COUNTERSHAFT PULLEY. 3/4 BORE WITH SET SCREW HOLE. EXACT REPLACEMENT TO THE OLD AND FLIMSY 9-427 ZAMAK ONES.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 10-12 INCH LATHE 10F-11X TRAVERSE GEAR CASE ASSY NEW CASE WITH NEW STEEL GEARS AND SHAFT
|
|
|
NEW ATLAS CRAFTSMAN 10-12 INCH LATHE 10F-11X TRAVERSE GEAR CASE ASSEMBLY FOR 3/4 LEADSCREW LATHES. NEW SOLID ALUMINUM WITH NEW STEEL GEARS WITH NEW SHAFT.
|
|
|
|
|
|
|
|
|
|
NEW SOLID STEEL 9-303 COUMPOUND TOOL SLIDE FOR ATLAS 10 INCH LATHES
|
|
|
NEW ALL STEEL 9-303 COMPOUND TOOL SLIDE REPLACES THE FLIMSY CAST IRON ONE THAT BREAKS A LOT. TOP IS QCTP READY.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN LATHE LEADSCREW REPAIR LENGTH NEW USA
|
|
|
NEW ATLAS CRAFTSMAN LATHE 3/4-8 X 54 LONG FULLY KEYED ACME LEADSCREW FOR REPAIR. YOU MACHINE TO FIT YOUR LATHE.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS LATHE 9-27 REVERSE GEAR CASE WITH BUSHING USA MADE
|
|
|
NEW SOLID ALUMINUM USA MADE 9-27 REVERSE GEAR CASE WITH BUSHING USA MADE
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-12 INCH LATHE 10F-11X TRAVERSE GEAR CASE ASSY NEW CASE WITH NEW STEEL GEARS
|
|
|
NEW ATLAS CRAFTSMAN 10-12 INCH LATHE TRAVERSE GEAR CASE ASSEMBLY 10F-11X FOR 3/4 LEADSCREW LATHES. NEW FACTORY CASE WITH NEW STEEL GEARS AND SHAFT.
|
|
|
|
|
|
|
|
|
|
NEW ATLAS CRAFTSMAN 10-12 INCH LATHE HEADSTOCK 10-241 BULL BACK GEAR
|
|
|
NEW ATLAS CRAFTSMAN 10-241X HEADSTOCK BULL BACK GEAR ASSEMBLY WITH PIN. MACHINED FOR SOLID ALUMINUM.
|
|
|
|
|
|
|
|
|
|
NEW USA MADE ALL STEEL TRAVERSE GEAR CASE REPLACES 10F-11X ATLAS CRAFTSMAN 10-12 LATHES
|
|
|
NEW USA MADE ALL STEEL TRAVERSE GEAR CASE FOR THE ATLAS CRAFTSMAN 10-12 INCH LATHES WITH 3/4 LEADSCREWS AND POWER CROSS FEED. REPLACES 10F-11X ZAMAC FACTORY UNIT. THESE ARE MADE TO ORDER AND HAVE EXTENDED LEAD TIME.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 10+12 INCH LATHE APRON REPAIR KIT
|
|
|
ATLAS CRAFTSMAN 10+12 INCH LATHE APRON REPAIR KIT. ALL IN FINE SHAPE AND CLEAN. MOST EVERYTHING YOU NEED TO REBUILD YOUR MACHINES APRON TO LAST FOR YEARS TO COME.FOR POWER CROSSFEED AND 3/4 LEADSCREW 10-12 INCH LATHES.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 101 618 6 INCH LATHE TIMKEN HEADSTOCK USED
|
|
|
USED AND MECHANICALLY SOUND ATLAS or CRAFTSMAN 101 618 6 INCH LATHE TIMKEN HEADSTOCK WITH 1-10 THREAD MOUNT
|
|
|
|
|
|
|
|
|
|
NEW USA MADE ATLAS CRAFTSMAN COMMERCIAL 12 INCH LATHE 696-149 LEADSCREW
|
|
|
NEW USA MADE 696-149 ATLAS CRAFTSMAN 12 INCH COMMERCIAL LATHE LEADSCREW. 49 1/2 OVERALL LENGTH
|
|
|
|
|
|
|
|
|
|
ORIGINAL ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-500 MILLING ATTACHMENT
|
|
|
ORIGINAL ATLAS CRAFTSMAN 6 INCH SWING LATHE M6-500 MILLING ATTACHMENT . COMES WITH EVERYTHING YOU NEED TO GET STARTED TODAY. FITS MODELS 618, 10100, 3950 AND MK1-2 LATHES.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN LATHE COMPLETE 9-27X REVERSER FEED GEARBOX
|
|
|
FINE USED AND COMPLETE ATLAS LATHE 9-27X REVERSER FEED GEARBOX. ALL GOOD GEARS, READY TO BOLT ON AND GO. SHIFT YOKE AND 9-48B ARE NEW ALONG WITH FIBER WASHERS.
|
|
|
|
|
|
|
|
|
|
ATLAS 10 INCH LATHE QUICK CHANGE GEARBOX CONVERSION KIT
|
|
|
COMPLETE 10 INCH ATLAS QUICK CHANGE GEARBOX CONVERSION KIT. REPLACES YOUR FWD/REV FEED GEARBOX AND BOLTS RIGHT ON WITH ONLY POSSIBLY HAVING TO SHORTEN THE SMALL END OF THE LEADSCREW 1 INCH. COMPLETE INSTRUCTION AVAILABLE. . YOU WILL NEVER NEED YOUR CHANGE GEARS AND THE HASSLE OF USING THEM AGAIN. SHIPS OVERSEAS IN 2 FLAT RATE BOXES. UPS ONLY IN USA. CONTACT ME FOR SHIPPING QUOTE PLEASE. CAN END AT ANYTIME. FOR SALE ON EBAY ALSO.
|
|
|
|
|
|
|
|
|
|
ATLAS CRAFTSMAN 12 INCH LATHE COMPLETE QUICK CHANGE GEARBOX KIT
|
|
|
COMPLETE ATLAS CRAFTSMAN 12 INCH LATHE QUICK CHANGE GEARBOX KIT. GOOD SHAPE. CAN CONVERT YOUR OLD CHANGE GEAR 12 INCH LATHE TO A QC LATHE. COMPLETE WITH GEAR DOORS. MAY NEED TO ALTER YOUR LEADSCREW END POSSIBLY TO FIT IN GEARBOX. PLEASE EMAIL FIRST ON AVAILABILITY. WILL NOT WORK FOR 10 INCH MODELS. UPS SHIPPING IN USA ONLY. SHIPS IN 2 USPS FLAT RATE BOXES PARTIALLY DIS-ASSEMBLED OVERSEAS. SHIPS COMPLETE IN USA UPS ONLY NO USPS. PAINT AS NEEDED.
|
|
|
|
